High Trigger Picture CCTV DVR Recorder / 4ch Mobile DVR 720×576p

High Trigger Picture CCTV DVR Recorder / 4ch Mobile DVR 720×576p

CCTV DVR Recorder User’s Manual

First of all, thank you very much for using our Panoramic mobile recorder!

The system for your car blind spot image perspective, for your safe driving escort. Enjoy driving, driving without a blind spot to experience the feeling of no dead ends.

This high-end car parking system combined with the owners driving habits developed a cost-effective automotive safety products more suited to the owners use.

This parking system is based on road conditions the driver's operating habits, manual and automatic control of the video analysis is displayed.

The role and function of parking system

★Quad intelligent parking system installation does not destroy the original car circuit, will not affect the safety car circuit, does not affect the vehicle warranty 4S shop situation.

★ This product has a front, left side, as the right side, rear four functions, the driver can according to the required driving environment, monitoring the situation around the car; two with automatic and manual control mode, when the factory default automatic mode.

CCTV DVR Recorder Technical parameters

the screen mode

★Auto Mode introduces :( numbers represent the corresponding camera channel number, the channel number is not shown)

1. When connected to four cameras, camera work after the car starts, the screen automatically displays Quad mode, automatically shut down after a delay of 5 seconds.

1. When connected to three cameras, the camera work after the car starts, the screen automatically displays three Split mode, automatically shut down after a delay of 5 seconds.
2. When connected to two cameras, camera work after the car starts, the screen automatically displays Dual split mode, automatically shut down after a delay of 5 seconds.
3. Forward Looking trigger boot, depending on Full screen before the show, trigger an automatic shutdown of the exit delay 3 seconds.
4. After triggering a front or reverse power, turn left, turn left light trigger Full display screen for 3 seconds after the resumption of the automatic segmentation of video images.
5. After triggering a front or reverse power, turn right at lights, turn right trigger Full display screen for 3 seconds to return to automatic segmentation of video images.
6. Reverse trigger on, linked to reverse gear reversing Full screen display, shut down automatically after hanging reverse gear delayed for 3 seconds,

CCTV DVR Recorder Wiring Diagram Installation

<DIP switch>

★ mirror DIP switch: 4 switches, achieve about Mirror: dial-up ON, mirroring; OFF Just dial down. As default.

★ Parking DIP switch: a switch (fifth), to dial ON, system startup power loss protection, voltage is not enough, the system automatically dial down dormancy; OFF, power loss protection cancel.

To achieve parking video surveillance, proposed to ON state.

The use of video recording:

1. Before using TF card format: TF card is inserted, power boot into POST mode (display

automatically turns off after five seconds into standby) by remote control Red Dot Button is on, press

ESC or Red Dot Stop recording (The default boot automatically start recording), press the "MENU"

button to enter the first page of the menu, press again to switch SETUP menu page, select

FORMAT, press the "REC or Red Dot ”,Press the left and right buttons to select EXECUTE,

press "ESC or Red Dot ” Formatting.

( 2 ) Modify the system date and time: Press the "MENU" button to enter the menu, press the switch to

the SETUP menu page, select DATE INPUT again, press "REC or Red Dot ”Key to enter the interface,

press the "left" or "right" key to switch to the SET, press "REC or Red Dot "Button to enter the date and

time by switching the left and right, press" MENU "button to confirm and switch, press" REC

or Red Dot "Button to confirm, press the" MENU "to exit.

( 3 ) Playback: Press "ESC or Red Dot "Stop video playback again, press“ Red Dot ”Key to enter the Playback

menu, press the "left" or "right" button to select the video file, press "REC or Red Dot "Button to select

the playback, press the" MENU "button to fast forward.

P.S.Blue background is selected, the yellow background is not selected.

Parking Monitor Description

Parking monitoring starting voltage must be greater than 12.5V (car batteries generally 13-14V), then the battery power, and a fifth DIP switch to dial up sign Parking REC
This product has a power loss protection, voltage less than 11.5V off automatically enter the sleep state, when the voltage is restored back to normal will automatically open parking video surveillance state.

Frequently Asked Questions

Question 1: SMD Tact switch function?
A: Long press (more than 1 second), the device starts to work, automatic image display screen (the default screen is H), long press again, the device enters the standby state; (Note: Press 1 second, the device starts, but Car navigation display screen response time takes about 1 second.)
Short press (less than 1 second), single-screen and "field" screen to cycle;
Question 2: 4 trigger lines how to wire?
A: Line 1 (Green) is a front view of the trigger wire, before the next depending on the assist lamp or other neutral switch place; the 2nd line (white) left, as the trigger line, then turn left positive light; the 3rd line (yellow) to reversing trigger line, then reversing light positive; Line 4 (blue) to the right, as the trigger line, then turn right at lights positive

4ch car dvr

multi channel car dvr

High Trigger Picture CCTV DVR Recorder / 4ch Mobile DVR 720×576p Images