4 Inputs Mobile DVR System , Light Weight Vehicle 12v DVR Recorder
Mobile DVR System Description
- Power Led, electricity, light, when the system is in standby state, the power indicator lights flashing;
Status Led, electricity, light, when the system is recording, the power indicator lights flashing. This product
is the normal input voltage is 12V/24V.
(2) trigger line and manual keys can select the image in any way 4-way camera
(3)In Trigger state, hand the keys effectively. When you press the manual key "Quad" of 
or
button,
the trigger is invalid, Undo "QUAD" trigger to be effective
(4) After triggering undo, image delay three seconds, and enters the standby state.
Mobile DVR System Technical parameters
| Name | 4 Inputs Mobile DVR System , Light Weight Vehicle 12v DVR Recorder |
| Video system | PAL/NTSC(automatic identification system, attention, connect the camera before power on, The equipment support hybrid system) |
| Video parameters | Resolution 720×576, 25FPS, Vp-p:1.0V, impedance: 75Ω |
| Video Interface | 4 inputs (RCA connector), 1 outputs (RCA connector) |
| Video Recording | TF Card (less than 64G), the video format is AV |
| Audio Interface | 1 inputs and 1 outputs (Reservation function) |
| Auto picture mode | Wire: High Trigger / Remote |
| Mirror | OFF/ON |
| Power Consumption | hosts running: 2W; power-saving mode: 1W |
| Output power | 12V / 1A (camera power supply) |
| Rated voltage | DC 12V/24V |
| Working temperature | 0℃-+55℃ |
| N.W. | 150g |
| Size | 91*53*23mm (L * W * H) |
the screen mode
★Auto Mode introduces :( numbers represent the corresponding camera channel number, the channel number is not shown)
When connected to four cameras, camera work after the car starts, the screen automatically displays Quad mode, automatically shut down after a delay of 5 seconds.
When connected to three cameras, the camera work after the car starts, the screen automatically displays three Split mode, automatically shut down after a delay of 5 seconds.
When connected to two cameras, camera work after the car starts, the screen automatically displays Dual split mode, automatically shut down after a delay of 5 seconds.
Forward Looking trigger boot, depending on Full screen before the show, trigger an automatic shutdown of the exit delay 3 seconds.
After triggering a front or reverse power, turn left, turn left light trigger Full display screen for 3 seconds after the resumption of the automatic segmentation of video images.
After triggering a front or reverse power, turn right at lights, turn right trigger Full display screen for 3 seconds to return to automatic segmentation of video images.
Reverse trigger on, linked to reverse gear reversing Full screen display, shut down automatically after hanging reverse gear delayed for 3 seconds,
★On-off system and Manual mode introduced:
1. Short press 
or long press (more than 1 second) SMT button boot, showing automatic segmentation of images,again, a short press or for a long time to press the SMT button to shutdown, the system enters standby mode, but the system still in the recording.
2. long press the SMT button to boot, short press button to switch image mode.
★ Host box with high integration technology, four cameras centralized power supply box by the host, thereby greatly reducing the tedious wiring during installation, in addition to four cameras captured the image signal after the hosts converted by a video cable and the navigation DVD of "AV" port connection
Four-core trigger line description
Four-wire:
Line 1 (Green) is a front view of the trigger line, you can access the Front
Office assist lamp or other neutral switch,When triggered,
the system boot, revoked, the system standby
Line 2 (white) left, as the trigger line, then turn left at light positive
(when the electric pen test twinkling).When the trigger,
automatic full screen display,
Line 3 (yellow) to reverse the trigger line, then reversing light positive,
When triggered, the system boot, when withdrawn,
system standby,
Line 4 (blue) to the right, as the trigger lines (sparking when electric
pen test) then turn right at lights positive,When triggered,
automatic full screen
Question 3: How to connect car navigation screen?
A: The device video output line connected car navigation screen, reverse video input port, the red line equipment output port connected to the reversing vehicle navigation screen test line, some car navigation screen video input is automatically detected, so reversing the test line can be removed.
Question 4: Why is there no output device?
A: Please check whether the device POWER Power lamp blinks, and if yes, then the device into standby mode, the output is off, press the power switch on the remote control or press the patch trigger switch device is turned on, POWER light long bright, video output device.
Question 5: Why dial left or right turn lamp lights, equipment no image?
A: The equipment in standby mode, dial left or right turn lamp lights, is not shown, because the normal driving, the driver will often toggle turn signal, if activated every time the screen display, it will affect the driver's driving safety a. If you intend to observe the situation around, press and touch switch or remote control to open the key.
Question 6: about the camera connected to where?
A: The camera can be connected at the bottom of the rearview mirror, you can monitor the front direction, because the left and right front wheels are usually dead, rear wheel rearview mirror, the normal camera monitoring is not required.
Product Tags:
|
|
4 Inputs Mobile DVR System , Light Weight Vehicle 12v DVR Recorder Images
|
