Durable 4 Channel DVR Security System / Vehicle DVR Camera System RCA Connector

Durable 4 Channel DVR Security System / Vehicle DVR Camera System RCA Connector

Ⅰ.Description

• Power Led, Power, the lights lit, when the voltage is lower than 9v, the power light flashes; when the system enters standby mode, the power light flashes. This product is the normal input voltage of 12 / 24V.

(2) trigger line and manual keys can select the image in any way 4-way camera

(3)In Trigger state, hand the keys effectively. When you press the manual key "Quad" of or button, the trigger is invalid, Undo "QUAD" trigger to be effective

(4) After triggering undo, image delay three seconds, and enters the standby state.

(5) the trigger condition, no priority, when the trigger line when more than two trigger, then the trigger line corresponding channel full-screen image, only three seconds, and then jumps automatically split image screen.

(6) can connect up to four cameras, and automatically split video screen

(7) car camera powered by the device for easy wiring

(8) DVD display device triggered by a switch, wiring and display convenience

(9) Each image can be set to forward / mirroring respectively, RCA connectors can be configured to connect DVR / VCD

Ⅱ.the screen mode

★Auto Mode introduces :( numbers represent the corresponding camera channel number, the channel number is not shown)

1. When connected to four cameras, camera work after the car starts, the screen automatically displays four images at the same time, automatically shut down after a delay of 5 seconds.
2. When connected to three cameras, the camera work after the car starts, the screen automatically displays three images at the same time, automatically shut down after a delay of 5 seconds.
3. When connected to two cameras, camera work after the car starts, the screen automatically displays two images at the same time, automatically shut down after a delay of 5 seconds.
4. Forward Looking trigger boot, depending on the big screen before the show, trigger an automatic shutdown of the exit delay 3 seconds.
5. After triggering a front or reverse power, turn left, turn left light trigger large display screen for 3 seconds after the resumption of the automatic segmentation of video images.
6. After triggering a front or reverse power, turn right at lights, turn right trigger large display screen for 3 seconds to return to automatic segmentation of video images.
7. Reverse trigger on, linked to reverse gear reversing a large screen display, shut down automatically after hanging reverse gear delayed for 3 seconds,

<The role and function of parking system>

★Quad intelligent parking system installation does not destroy the original car circuit, will not affect the safety car circuit, does not affect the vehicle warranty 4S shop situation.

★ This product has a front, left side, as the right side, rear four functions, the driver can according to the required driving environment, monitoring the situation around the car; two with automatic and manual control mode, when the factory default automatic mode.

Ⅲ.Button remote Features:

:Press, to display "type" 4-screen mode.

:Press, to display "H-type" four-screen mode

:Press, Channel 1 big screen again press, return to automatic display.

:Press, Channel 2 large screen, press again to return to automatic display.

:Press, Channel 3 big screen again press, return to automatic display.

:Press, Channel 4 large screen, press again to return to automatic display.

:Press, display a variety of 3 screen mode,Cycle through each screen,each press a mode switch.

:Press, display a variety of 2 screen modeCycle through each screen,each press a mode switch.

:Press the power ON, again short press the power OFF.

P.S.When you press the manual key“Quad”ORkey, the trigger is invalid, Undo "QUAD" trigger to be effective

Ⅳ．<Wiring Diagram Installation>

<DIP switch>

★ mirror DIP switch: 4 switches, achieve about Mirror: dial-up ON, mirroring; OFF Just dial down. As default.

★ DVR DIP switch: a switch, switching system switched on: up dial ON, the system always boot; dialed down OFF, trigger boot.

The access DVR recording, it is recommended to ON state.

Ⅴ.Technical parameters

<Four-core trigger line description>

Four-wire:

Line 1 (Green) is a front view of the trigger line, you can access the Front Office assist lamp or other neutral switch,When triggered, the system boot, revoked, the system standby

Line 2 (white) left, as the trigger line, then turn left at light positive (when the electric pen test twinkling).When the trigger, automatic full screen display,

Line 3 (yellow) to reverse the trigger line, then reversing light positive,When triggered, the system boot, when withdrawn, system standby,

Line 4 (blue) to the right, as the trigger lines (sparking when electric pen test) then turn right at lights positive,When triggered, automatic full screen

4ch car dvr

multi channel car dvr

Durable 4 Channel DVR Security System / Vehicle DVR Camera System RCA Connector Images