12 Volt Car Digital Video Recorder , Mobile Commercial Vehicle Camera Systems
Digital Video Recorder description
- Can be connected up to 4 cameras, split the screen sutomatically.
- 4 Cameras can trigger seperately, automatical full screen display.
- Can set On/Off of each channel seperately & can be connected to DVR/VCD with RCA port
- Full screen display, audio switch to corresponding channel audio for output.
- High/Lowe voltage protection and overload protection.
Digital Video Recorder specification
- Handkey is effective under the status of triggered.Trigger is invalid,after “QUAD” pressed.Trigger is valid “QUAD” is revocated.
- After revocation of triggering, image delay 2 seconds and return to the previous status.
Digital Video Recorder Technique parameters
| Name | 12 Volt Car Digital Video Recorder , Mobile Commercial Vehicle Camera Systems |
| Video system | PAL/NTSC(automatic identification, attention, connect the camera before power on) |
| Video parameters | Resolution 720×576, 25FPS, Vp-p:1.0V, impedance: 75Ω |
| AV/AU interface | 4CH Input(Aviation head interface),2 CH Output(1 CH Aviation head interface, 1CH RCA) |
| POWER | 9W/18W |
| Work environment | Rated voltage DC 12V/24V , Working temperature 0℃-+55℃ |
| N.W | 340g |
| SIZE | 155*87*32mm |
Installation
1,Front Panel
(1) DC12V/24V Input,Connect power box, Red line take positive, the black line by negative
(2) Wire control interface, 1-4 corresponding to trigger channel 1-4.
(3) RCA interface, Video output.
(4) RCA interface, Audio output.
(5) Aviation head,
1. DC12V out, Red. 2. GND, Black. 3.Audio Output, Green. 4. Video Output, Yellow
(6)Connect to hand-key.
2,Rear Panel
(7)-(10)Corresponding 1-4 channel, Each channel aviation head,
1. DC12V out, Red. 2. GND, Black. 3.Audio Input, Green. 4. Video Intput, Yellow
(11)Mirror switch, Each corresponding to a video channel.
Packing and shipment
